32
Section 5
Digital Operator Control
5.1
Introduction and configuration
Red LED lights in
remote control mode.
Forward key.
Select forward run in
digital operator
control mode. Mo-
mentary operation.
Reverse key.
Select reverse run in
digital operator
control mode.
Momentary opera-
tion.
Red LED lights when
function parameter is
displayed.
Red LED lights when
output frequency is
displayed.
Red LED lights when
motor is reverse
running.
Numeral change key.
Change numeral such
as frequency and
function parameter.
∧
: Increment
∨
: Decrement
Jog key.
Select jog operation.
Reset key.
Reset inverter when
fault occurs.
DATA
Hz
KDOP-02
SEQ
FRQ
REV
FWD
JOG
REMOTE STOP
FWD
RUN
REV
RUN
STOP
PRGM
(Fn)
JOG
MODE
RESET
READ
ENTER
E-Stop key. (orange)
E-Stop command in
digital operator
control mode.
Red LED lights when
motor is forward
running.
Red LED lights when
Jog operation is
selected.
Read/write key.
Pressing this key recalls and displays
indicated data from memory. De-
pressing this second time saves
displayed data into memory.
Red LED lights in
remote frequency
command mode.
NOTE:
Factory setting for CC series inverter is remote operator control
mode with 5 preset speeds. (
Fn10=1
.
Fn11=2
,
Fn46=0
)
NOTE:
Press reset and read/enter together to reset inverter to default
'Quick Load' values set by code at
Fn29
.
CAUTION: Important!
In remote control mode, press STOP and REV simultaneously
for emergency stop at local keypad station.
Function key.
Enter parameter
setting process.
8.8.8.8
