DRESSTA TD-25M EXTRA, Руководство по обслуживанию, Страница: 517 / 595

SUSPENSION
SECTION 14
Page 23
DRESSTA TD-25M EXTRA
TRACK ROLLER
Fig. 14.26. Track Roller Bushing Clearance
A. Distance Between Seal Retainer Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216.2
±
0.15 [mm]
B. Width of Idler Shaft Bearing Surfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . 209.35
±
0.05 [mm]
C. Thrust Washer Thickness (each) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.14
±
0.04 [mm]
D. Bushing Inside Diameter (assembled) . . . . . . . . . . . . . . . . . . . . . . . . . . . 105.3
±
0.05 [mm]
E. Roller Shaft Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104.93
±
0.05 [mm]
Diametral Clearance (D-E) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.35
±
0.1 [mm]
End Clearance A-(B+2C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.6
±
0.3 [mm]
28. REASSEMBLY (Refer to Fig.’s 14.23 and 14.24)
Fig. 14.27. Bushing Installation
A. Bushing Pressed Below Edge of Roller Bore . . . . . . . . . . . . . . . . . . . . . . . . . . 7.06
±
0.64 [mm]
1. If replacing bushings (7), coat 25 [mm] of outer end of roller bore and leading edges of bushing
OD with LOCTITE #601. Press bushing in as indicated in Fig. 14.27.