Draytek VigorIPPBX 3510 Series, Руководство пользователя

Страница: 129 / 269

VigorIPPBX 3510 Series User’s Guide 121
Ping IP – If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live) – Type a value for connection time to live.
Bridge Mode If you choose Bridged IP as the protocol, you can check this
box to invoke the function. The router will work as a bridge
modem.
PPP/MP Setup PPP Authentication – Select PAP only or PAP or CHAP for
PPP. If you want to connect to Internet all the time, you can check
Always On .
Idle Timeout – Set the timeout for breaking down the Internet
after passing through the time without any action.
IP Address
Assignment Method
(IPCP) Usually ISP dynamically assigns IP address to you each time you
connect to it and request. In some case, your ISP provides service
to always assign you the same IP address whenever you request.
In this case, you can fill in this IP address in the Fixed IP field.
Please contact your ISP before you want to use this function.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use WAN
IP Alias. You can set up to 8 public IP addresses other than the
current one you are using. Notice that this setting is available for
WAN1 only.
Fixed IP – Click Yes to use this function and type in a fixed IP
address in the box of Fixed IP Address .
Default MAC Address – You can use Default MAC Address or
specify another MAC address by typing on the boxes of MAC
Address for the router.
Specify a MAC Address – Type the MAC address for the router
manually.