Draytek Vigor2762 series, Руководство пользователя

Страница: 581 / 651

srv nat trigger setdefault
srv nat trigger view
srv nat trigger n [-<command> <parameter> | ... ]
Syntax Description
Syntax Description
Parameter Description
setdefault Set to factory default settings.
view Dispaly all of the port triggering settings.
n <command><parameter>|
…]
“n” means the rule number.
The available commands with parameters are listed below.
[…] means that you can type in several commands in one line.
-c[XXX] Type a comment for such rule if required.
-e [0/1] Enable (1) or disable (0) a rule (specified with rule number).
-p [1/2/3] Specify the protocol for such trigger rule.
1 – TCP
2 – UDP
3 - All
-t Specify the port number (0~65535) for trigger.
-P Specify the incoming protocol for such trigger rule.
-i Specify the port number (0~65535) for incoming protocol.
-d Delete the selected trigger rule.
-v Display the port trigger settings for specified rule.
Example
Example
> srv nat trigger 1 -c after_dinner
> srv nat trigger 1 -e 1
> srv nat trigger 1 -p 1
> srv nat trigger 1 -t 2000
> srv nat trigger 1 -P 2
> srv nat trigger 1 -i 3000
> srv nat trigger 1 -v
Port Trigger Rule Index:1
Status:Enable
Comment:after_dinner2000
Triggering Protocol:TCP
Triggering Port:2000
Incoming Protocol:UDP
Incoming Port:3000
Telnet Command:
Telnet Command:
srv nat status
srv nat status
This command allows users to view NAT Port Redirection Running Table.
Example Example
> srv nat status
Vigor2762 Series User’s Guide 571