Draytek Vigor2762 series, Руководство пользователя

Страница: 506 / 651

Telnet Command:
Telnet Command:
ip6 internet
ip6 internet
This command allows you to configure settings for accessing Internet.
Syntax
Syntax
ip6 internet -W n -M n [-<command> <parameter> | ... ]
Syntax Description
Syntax Description
Parameter Description
-W n W means to set WAN interface and n means different selections.
Default is WAN1.
n=1: WAN1
n=2: WAN2
n=3: WAN3
.
.
n=X: WANx
-M n M means to set Internet Access Mode (Mandatory) and n means
different modes (represented by 0 – 5)
n= 0: Offline,
n=1: PPP,
n=2: TSPC,
n=3: AICCU,
n=4: DHCPv6,
n=5: Static
n=6: 6in4-Static
n=7: 6rd
[<command>
<parameter>|…] The available commands with parameters are listed below.
[…] means that you can type in several commands in one line.
For 6rd
-C n Set 6rd Connection Mode.
n = 0: Auto
n = 1: Static.
-s [server] Set 6rd IPv4 Border Relay.
server= IPv4 address
-m n Set 6rd IPv4 address mask length.
n=1 to 32.
-p [prefix] Set 6rd IPv6 prefix.
prefix= IPv6 address
-l n Set 6rd IPv6 prefix length.
n=1 to 64.
For 6in4
-s [server] Set 6in4 Remote Endpoint IPv4 Address.
server= IPv4 address
-I [IPv6 Addr] Set 6in4 IPv6 Address.
IPv6 Addr= IPv6 address.
-P n Set 6in4 IPv6 WAN prefix length.
n=1 to 64. (Default number is 64)
-p [prefix] Set 6in4 LAN Routed Prefix.
prefix= IPv6 address
-l n Set 6in4 LAN Routed Prefix length.
n=1 to 64. (Default number is 64)
Vigor2762 Series User’s Guide 496