Draytek Vigor2762 series Скачать руководство пользователя страница 499

Страница: 499 / 651

Range: Indicate a range of port number.
Any: It means any port number can be used as destination port.

-G [default/specific]

Specify the gateway mode.

-L [default/specific]

Specify the failover gateway mode.

-s [value]

Indicate the source IP start.
Value: The type format shall be “xxx.xxx.xxx.xxx”. (e.g,
192.168.1.0)

-S [value]

Indicate the source IP end.
Value: The type format shall be “xxx.xxx.xxx.xxx”. (e.g,

192.168.1.100)

-d [value]

Indicate the destination IP start.
Value: The type format shall be “xxx.xxx.xxx.xxx”. (e.g,
192.168.2.0)

-D [value]

Indicate the destination IP end.
Value: The type format shall be “xxx.xxx.xxx.xxx”. (e.g,

192.168.2.100)

-p [value]

Indicate the destination port start.
Value: Type a number (1 ~ 65535) as the port start (e.g., 1000).

-P [value]

Indicate the destination port end.
Value: Type a number (1 ~ 65535) as the port end (e.g., 2000).

-y [value]

Indicate the priority of the policy route profile.
Value: Type a number (0 ~ 250). The default value is “150”.

-I [value]

Indicate the interface specified for the policy route profile.
Value: Available interfaces include,
LAN1 ~ LAN8, IP_Routed_Subnet,

DMZ_Subnet,
WAN1 ~ WAN5,

VPN_PROFILE_1 ~ VPN_PROFILE_100,
WAN_1_IP_ALIAS_1 ~ WAN_4_IP_ALIAS_8

-g [value]

Indicate the gateway IP address.
Value: The type format shall be “xxx.xxx.xxx.xxx”. (e.g,
192.168.3.1)

-l [value]

Indicate the failover IP address.
Value: The type format shall be “xxx.xxx.xxx.xxx”. (e.g,

192.168.4.1)

-t [value]

It means “protocol”.
Value: Available settings include “TCP”, “UDP”, “TCP/UDP”, “ICMP”
and “Any”.

-n [0/1]

Indicates the function of “Force NAT”.
0: Disable the function.
1: Enable the function.

-a [0/1]

Indicates to enable the function of failover.
0: Disable the function.
1: Enable the function.

-f [value]

It means to specify the interface for failover.
Value: Avaialbe interfaces include,
NO_FAILOVER,

Default_WAN,
Policy1 ~ Policy60

LAN1 ~ LAN8
IP_Routed_Subnet,

DMZ_Subnet,
WAN1 ~ WAN5,

Vigor2762 Series User’s Guide

489

Содержание Vigor2762 series












































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vigor2762 series

Отзывы:

Бренды по названию

Популярные бренды

Draytek Vigor2762 series, Руководство пользователя

Результаты поиска

Содержание Vigor2762 series

Отзывы:

Бренды по названию

Популярные бренды