Draytek Vigor2762 series, Руководство пользователя

Страница: 563 / 651

%% Openport settings:
Index Status Comment Local IP Address
********************************************************
No data entry.
Telnet Command:
Telnet Command:
show nat
show nat
This command displays current status of NAT.
Example
Example
> show nat
Port Redirection Running Table:
Index Protocol Public Port Private IP Private Port
1 0 0 0.0.0.0 0
2 0 0 0.0.0.0 0
3 0 0 0.0.0.0 0
4 0 0 0.0.0.0 0
5 0 0 0.0.0.0 0
6 0 0 0.0.0.0 0
7 0 0 0.0.0.0 0
8 0 0 0.0.0.0 0
9 0 0 0.0.0.0 0
10 0 0 0.0.0.0 0
11 0 0 0.0.0.0 0
12 0 0 0.0.0.0 0
13 0 0 0.0.0.0 0
14 0 0 0.0.0.0 0
15 0 0 0.0.0.0 0
16 0 0 0.0.0.0 0
17 0 0 0.0.0.0 0
18 0 0 0.0.0.0 0
19 0 0 0.0.0.0 0
20 0 0 0.0.0.0 0
--- MORE --- ['q': Quit, 'Enter': New Lines, 'Space Bar': Next
Page]
Telnet Command: Telnet Command: show portmap show portmap
This command displays the table of NAT Active Sessions.
Example
Example
> show portmap
-------------------------------------------------------------------------
-
Private_IP:Port Pseudo_IP:Port Peer_IP:Port [Timeout/Protocol/Flag]
-------------------------------------------------------------------------
-
Telnet Command:
Telnet Command:
show pmtime
show pmtime
This command displays the reuse time of NAT session.
Level0: It is the default setting.
Level1: It will be applied when the NAT sessions are smaller than 25% of the default setting.
Vigor2762 Series User’s Guide 553