Draytek Vigor2762 series, Руководство пользователя

Страница: 513 / 651

-V It means to show the RADVD configuration.
-L <time/infinity>: Set prefix valid lifetime.
-P <time/infinity> Set prefix preferred lifetime.
-r [num] Make RADVD test for item [num].
num - 0-default, 121:logo 121, 124:logo 124.
-R Reload Config and send RA for subnets.
-u View MTU on all interfaces.
Example
Example
> ip6 radvd LAN1 -v
% [LAN1] setting !
% Status : Enable
% RDNSS : Enable
% Default Lifetime : 1800 seconds
% min interval time: 200 seconds
% MAX interval time: 600 seconds
% Hop limit : 64
% MTU : auto
% Reachable time : 0
% Retransmit time : 0
% Preference : Medium
% Prefix valid lifetime : 2592000
% Prefix preferred lifetime : 604800
Telnet Command:
Telnet Command:
ip6 mngt
ip6 mngt
This command allows you to manage the settings for access list.
ip6 mngt list
ip6 mngt list [add<index> <prefix> <prefix-length>|remove <index>|flush]
ip6 mngt status
ip6 mngt [http|telnet|ping|https|ssh] [on|off]
Syntax Description Syntax Description
Parameter Description
list It means to show the setting information of the access list.
status It means to show the status of IPv6 management.
add It means to add an IPv6 address which can be used to execute
management through Internet.
index It means the number (1, 2 and 3) allowed to be configured for IPv6
management.
prefix It means to type the IPv6 address which will be used for accessing
Internet.
prefix-length It means to type a fixed value as the length of the prefix.
remove It means to remove (delete) the specified index number with IPv6
settings.
flush It means to clear the IPv6 access table.
http|telnet|ping|https|ssh These protocols are used for accessing Internet.
Vigor2762 Series User’s Guide 503