Draytek Vigor2762 series, Руководство пользователя

Страница: 485 / 651

Example
Example
> ip aux add 192.168.1.65 1
% 192.168.1.65 has added in index 3.
When you type ip aux? , the current auxiliary WAN IP Address table will be shown as the
following:
Index no. Status IP address IP pool
----------------------------------------------
1 Enable 172.16.3.229 Yes
2 Enable 172.16.3.56 No
3 Enable 172.16.3.113 No
Telnet Command:
Telnet Command:
ip addr
ip addr
This command allows users to set/add a specified LAN IP your router.
Syntax
Syntax
ip addr [IP address]
Syntax Description
Syntax Description
Parameter Description
IP address The LAN IP address.
Example
Example
>ip addr 192.168.50.1
% Set IP address OK !!!
Info When the LAN IP address is changed, the start IP address of DHCP server
are still the same. To make the IP assignment of the DHCP server being
consistent with this new IP address (they should be in the same network
segment), the IP address of the PC must be fixed with the same LAN IP
address (network segment) set by this command for accessing into the web
user interface of the router. Later, modify the start addresses for the
DHCP server.
Telnet Command: ip
Telnet Command: ip
nmask
nmask
This command allows users to set/add a specified netmask for your router.
Syntax
Syntax
ip nmask [IP netmask]
Syntax Description
Syntax Description
Parameter Description
IP netmask The netmask of LAN IP.
Example
Example
Vigor2762 Series User’s Guide 475