Draytek Vigor2762 series, Руководство пользователя

Страница: 578 / 651

> srv nat ipsecpass status
%% Status: IPsec ESP pass-thru and IKE src_port:500 preservation
is OFF.
Telnet Command: Telnet Command: srv nat openport srv nat openport
This command allows users to set open port settings for NAT server.
srv nat openport n m [-<command> <parameter> | … ]
Syntax Description
Syntax Description
Parameter Description
n It means the index number for the profiles. The range is from 1 to
20.
m It means to specify the sub-item number for this profile. The range
is from 1 to 10.
[<command>
<parameter>|…] The available commands with parameters are listed below.
[…] means that you can type in several commands in one line.
-a <enable> It means to enable or disable the open port rule profile.
0: disable
1:enable
-c <comment> It means to type the description (less than 23 characters) for the
defined network service.
-i <local ip> It means to set the IP address for local computer.
Local ip: Type an IP address in this field.
-w <idx> It means to specify the public IP.
1: WAN1 Default,
2: WAN1 Alias 1,
…and so on.
-p <protocol> Specify the transport layer protocol.
Available values are TCP, UDP and ALL.
-s<start port> It means to specify the starting port number of the service offered
by the local host. The range is from 0 to 65535.
-e<end port> It means to specify the ending port number of the service offered
by the local host.
The range is from 0 to 65535.
-v It means to display current settings.
-r <remove> It means to delete the specified open port setting.
remove: Type the index number of the profile.
-f <flush> It means to return to factory settings for all the open ports
profiles.
Example
Example
> srv nat openport 1 1 -a 1 -c games -i 192.168.1.100 -w 1 -p TCP
-s 23 -e 83
> srv nat openport -v
%% Status: Enable
%% Comment: games
%% Private IP address: 192.168.1.100
Index Protocal Start Port End Port
*****************************************************************
Vigor2762 Series User’s Guide 568