Draytek Vigor2133 Vac, Руководство пользователя

Страница: 682 / 706

Vigor2133 Series User’s Guide 670
wl_dual config ratectl show
wl_dual config isolate lan [ssid_num enable]
wl_dual config isolate member [ssid_num enable]
wl_dual config isolate vpn [ssid_num enable]
wl_dual config isolate show
S S y y n n t t a a x x D D e e s s c c r r i i p p t t i i o o n n
Parameter Description
enable[value] It means to enable/disable the 5GHz wireless function.
1: enable
0: disable
show It means to display if 5G wireless function is enabled or not.
mode[value] It means to select connection mode for wireless connection.
Available settings are: "11a", "11n_5g", "11n" and "11an".
mode show It means to display what the current wireless mode is.
channel [number] It means the channel of frequency of the wireless LAN.
The available settings are: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104,
108, 112, 116, 120, 124, 128, 132, 136 and 140.
number=0, means Auto
number=36, means Channel 36
….
Number=52, means Channel 52.
channel show It means to display what the current channel is.
preamble [enable] It means to define the length of the sync field in an 802.11 packet.
Most modern wireless network uses short preamble with 56 bit sync
field instead of long preamble with 128 bit sync field. However,
some original 11b wireless network devices only support long
preamble.
0: disable to use long preamble.
1: enable to use long preamble.
preamble show It means to display if preamble is enabled or not.
ssid[ssid_num enable
ssid_name] It means to set the name of the SSID, hide the SSID if required.
ssid_num: Type 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3 or SSID4.
ssid_name: Give a name for the specified SSID.
ssid hide [ssid_num enab le] It means to hide the name of the SSID if required.
ssid_num: Type 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3 or SSID4.
enable: Type 0 to hide the SSID or 1 to display the SSID.
ssid show It means to display a table of SSID configuration.
ratectl [ssid_num enable
upload download] It means to set the rate control for the specified SSID.
ssid_num: Choose 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3 or SSID4.
enable: It means to enable the function of the rate control for the
specified SSID. 0: disable and 1:enable.
upload: It means to configure the rate control for data upload. The
unit is kbps.
download: It means to configure the rate control for data
download. The unit is kbps.
(example:
wl dual config ratectl 1 1 25 25
)
ratectl show It means to display the data transmission rate (upload and
download) for SSID1, SSID2, SSID3 and SSID4.