Dragino CPL01, Руководство пользователя

Страница: 3 / 32

User Manual for LoRaWAN End Nodes - CPL01 LoRaWAN Outdoor Pulse/Contact Sensor
Table of
Contents：
• 1. Introduction
• 1.1 What is CPL01 LoRaWAN Pulse/Contact Sensor
• 1.2 Features
• 1.3 Installation
• 1.4 Storage & Operation Temperature
• 1.5 Applications
• 1.6 Mechanical
• 1.7 Pin Definitions and Switch
• 1.7.1 Pin Definition
• 1.7.2 Jumper JP2(Power ON/OFF)
• 1.7.3 BOOT MODE / SW1
• 1.7.4 Reset Button
• 1.7.5 LED
• 2. Operation Mode
• 2.1 How it works?
• 2.2 Example to use for LoRaWAN network
• 2.3 Uplink Payload
• 2.3.1 Device Status, FPORT=5
• 2.3.2 Sensor Configuration, FPORT=4
• 2.3.3 Real-Time Open/Close Status, Uplink FPORT=2
• 2.3.4 Historical Door Open/Close Event, FPORT=3
• 2.4 Datalog Feature
• 2.4.1 Unix TimeStamp
• 2.4.2 Set Device Time
• 2.4.3 Poll sensor value
• 2.4.4 Decoder in TTN V3
• 2.5 Show data on Datacake
• 3. Configure CPL01 via AT Command or LoRaWAN Downlink
• 3.1 Set Transmit Interval Time
• 3.2 Set Password
• 3.3 Quit AT Command
• 3.4 Enable / Disable Alarm
• 3.5 Alarm Base on Timeout
• 3.6 Clear Flash Record
• 3.7 Set the sensor mode
• 3.8 Set trigger mode
• 3.9 Set the calculate flag
• 3.10 Set count number
Page 3 / 32 - last modified by Xiaoling on 2022/07/01 18:01