User Manual for LoRaWAN End Nodes - CPL01 LoRaWAN Outdoor Pulse/Contact Sensor
•
TDC: (default: 0x001C20)
Uplink interval for the total pulse count, default value is 0x001C20 which is 7200 seconds = 2 hours.
•
Disalarm: (default: 0)
If Disalarm = 1
, CPL01 will only send uplink at every TDC periodically. This is normally use for pulse meter
application, in this application, there are many disconnect/connect event, and platform only care about the total
number of pulse.
If Disalarm = 0
, CPL01 will send uplink at every TDC periodically.
•
Keep Status & Keep Time
•
Trigger mode (default: 0)
If Trigger mode = 0
, count close to open event.
If Trigger mode = 1
, count open to close event.
Page 14 / 32 - last modified by Xiaoling on 2022/07/01 18:01