User Manual for LoRaWAN End Nodes - CPL01 LoRaWAN Outdoor Pulse/Contact Sensor
•
•
•
•
•
•
•
5.1 How to use AT Command to configure CPL01
•
5.2 How to upgrade the firmware?
•
5.3 How to change the LoRa Frequency Bands/Region?
•
•
6.1 AT Commands input doesn't work
•
•
•
1. Introduction
1.1 What is CPL01 LoRaWAN Pulse/Contact Sensor
The Dragino CPL01 is a
LoRaWAN Contact Sensor
. It detects open/close status and uplink to IoT server via
LoRaWAN network. user can see the dry contact status, open time, open counts in the IoT Server.
CPL01 is powered by
8500mAh Li-SOCI2 battery
, It is designed for long term use up to 10 years. (Actually Battery
life depends on the use environment, update period.)
The CPL01 will send periodically data every day as well as for each dry contact action. It also counts the contact
open times and calculate last open duration. User can also disable the uplink for each open/close event, instead,
device can count each open event and uplink periodically.
CPL01 has the open alarm feature, user can set this feature so device will send Alarm if the contact has been open
for a certain time.
CPL01 is designed for outdoor use. It has a weatherproof enclosure and industrial level battery to work in low to high
temperatures.
Each CPL01 is pre-load with a set of unique keys for LoRaWAN registration, register these keys to LoRaWAN
server and it will auto connect after power on.
*Battery life depends on how often to send data, please see
1.2 Features
• LoRaWAN v1.0.3 Class A protocol.
• Frequency Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915/IN865/RU864
• Open/Close detect
• Open/Close statistics
• 8500mAh industrial battery(none-rechargeable)
• AT Commands to change parameters
• Uplink on periodically and open/close event
• Datalog feature
• Remote configure parameters via LoRa Downlink
• Firmware upgradable via program port
• Wall Mountable
• Outdoor Use
Page 4 / 32 - last modified by Xiaoling on 2022/07/01 18:01
