User Manual for LoRaWAN End Nodes - CPL01 LoRaWAN Outdoor Pulse/Contact Sensor
2. Operation Mode
2.1 How it works?
Each CPL01 is shipped with a worldwide unique set of OTAA keys. To use CPL01 in a LoRaWAN network, user
needs to input the OTAA keys in the LoRaWAN network server. So CPL01 can join the LoRaWAN network and
start to transmit sensor data.
2.2 Example to use for LoRaWAN network
This section shows an example of how to join the TTN V3 LoRaWAN IoT server. Usages with other LoRaWAN IoT
servers are similar.
• In this use case, the CPL01 is connect to a dry contact sensor to detect the open/close event and send the
status to the LoRaWAN server. The CPL01 will uplink different types of messages to the LoRaWAN server.
See
Assume the DLOS8 is already set to connect to the
. We need to add the CPL01 device in TTN V3:
Step 1
: Create a device in TTN V3 with the OTAA keys from CPL01.
Each CPL01 is shipped with a sticker with the default device EUI as below:
Page 8 / 32 - last modified by Xiaoling on 2022/07/01 18:01
