User Manual for LoRaWAN End Nodes - CPL01 LoRaWAN Outdoor Pulse/Contact Sensor
•
Sensor Model
: For CPL01, this value is 0x0E
•
Firmware Version
: 0x0100, Means: v1.0.0 version
•
Frequency Band
:
*0x01: EU868
*0x02: US915
*0x03: IN865
*0x04: AU915
*0x05: KZ865
*0x06: RU864
*0x07: AS923
*0x08: AS923-1
*0x09: AS923-2
*0x0a: AS923-3
*0x0b: CN470
*0x0c: EU433
*0x0d: KR920
*0x0e: MA869
•
Sub-Band
:
• AU915 and US915:value 0x00 ~ 0x08
• CN470: value 0x0B ~ 0x0C
• Other Bands: Always 0x00
•
Battery Info:
Check the battery voltage.
Ex1
: 0x0B45 = 2885mV
Ex2
: 0x0B49 = 2889mV
2.3.2 Sensor Configuration, FPORT=4
CPL01 will only send this command after getting the downlink command (0x26 02) from the server.
Page 13 / 32 - last modified by Xiaoling on 2022/07/01 18:01