User Manual for LoRaWAN End Nodes - CPL01 LoRaWAN Outdoor Pulse/Contact Sensor
3.8 Set trigger mode
Feature: Set the trigger interrupt mode.
AT Command: AT+TTRMOD
Downlink Command:
•
Example
: 0xA401 //Same as AT+ TTRMOD =1
3.9 Set the calculate flag
Feature: Set the calculate flag
AT Command: AT+CALCFLAG
Command Example
Function
Response
AT+CALCFLAG =1
Set the calculate flag to 1.
OK
AT+CALCFLAG =2
Set the calculate flag to 2.
OK
Downlink Command:
•
Example
: 0XA501 //Same as AT+CALCFLAG =1
3.10 Set count number
Feature: Manually set the count number
AT Command: AT+SETCNT
Command Example
Function
Response
AT+ SETCNT =0
Set the count number to 0.
OK
AT+ SETCNT =100
Set the count number to 100.
OK
Downlink Command:
1.
Example
: 0xA6000001 //Same as AT+ SETCNT =1;
2.
Example
: 0xA6000064 //Same as AT+ SETCNT =100
Page 28 / 32 - last modified by Xiaoling on 2022/07/01 18:01