27
2.5.6.3
Defining NTCP Ports
Fig. 2.13.
Select NTCP port type from the Edit > Ports, Data Ports screen
The Nailed-up TCP (NTCP) is a Transmission Control Protocol. Rather than provide a listening port for
other devices to link, NTCP establishes its own unique permanent connection.
Once you define a NetGuardian data port as NTCP, you can configure its options in the
Nailed TCP
Connection Configuration
table located just below.
Note:
Each of the Data Port IDs (1-8) correspond with the NTCP Configuration IDs (1-8). For example,
if you select an NTCP port
Type
in ID #1 on the Data Port table, then you will need to configure your port
in ID #1 on the NTCP Configuration table.
Fig. 2.14.
Configure NTCP ports immediately below the Data Ports screen
Содержание NetGuardian 832A G5
Страница 132: ...127...