![background image](http://html1.mh-extra.com/html/dps-telecom/netguardian-832a-g5/netguardian-832a-g5_user-manual_2525695035.webp)
30
2.6.1
Alpha Numeric Pager Setup
The alpha numeric pager can receive text messages including alarm descriptions, time of occurrence,
and point addresses.
Use the following steps to configure the alpha numeric pager settings:
1. From the
Edit
menu >
Notification
screen, select an ID number to use. See Table 2.G for pager
descriptions.
Note:
Pager IDs are used in the alarm provisioning screen to designate the primary and secondary
person/device being paged when an alarm condition occurs or clears.
2. Under the
Type
column, select type
Alpha
from the drop-down menu, see Figure 2.16.
3. Enter the phone number of the Alpha numeric pager under the
Phone/Domain
heading.
4. Enter a personal identification number under the
PIN/Rcpt/Port
heading.
5. Set the pager data rate (i.e. 300, 1200, 2400 or 9600). The default baud is 1200.
6.
Select a pager word format (Data Bits, Parity, Stop Bits). The default setting is 7,Even,1.
1. Number of pages
2. Unit name
3. Port # and Address
(Applicable to T/Mon and IAM only)
4. Display number
5. Alarm point number
6. Alarm status: 1=alarm, 0=clear
7. Date and Time NetGuardian sent page
8. Alarm point description
9. Alarm status
01:
Net Guardi an 14
99.1.1.3.1
TOWER L I GHTS A l arm
7:36
8-25-2008
1
2
3
5
6
7
8
9
4
Fig. 2.17.
Alpha numeric pager description
2.6.2
SNPP Notification Setup
The alpha numeric pager can receive text messages including alarm descriptions, time of occurrence,
and point addresses from SNPP service.
Use the following steps to configure the alpha numeric pager settings:
1. From the
Edit
menu >
Notification
screen, select an ID number to use. See Table 2.G for pager
descriptions.
Note:
Pager IDs are used in the alarm provisioning screen to designate the primary and secondary
person/device being paged when an alarm condition occurs or clears.
2. Under the
Type
column, select type
SNPP
from the drop-down menu, see Figure 2.16.
3. Use the
Phone
field if a login username and password are required. They must be separated by a
colon and be no longer than 29 characters combined. Otherwire, leave this field blank.
4. Enter the numeric pager number under the
PIN/Rcpt/Port
heading.
5. Under the IPA field, enter the static IPA of the SNPP server. Port automatically defaults to 444.
2.6.3
Numeric Pager Setup
The numeric pager can receive point addresses of alarms.
Use the following steps to configure the numeric pager settings:
1. From the
Edit
menu >
Notification
screen, select an ID number to use, see Figure 2.16.
Содержание NetGuardian 832A G5
Страница 132: ...127...