M O N T A G E I N S T R U C T I E C E N T U R Y - P A G I N A 1
Fig. 7
Lid
Vacuum
adaptor
Suction cover
A S S E M B L Y I N S T R U C T I O N S S U N L A K E - O V A L - P A G E 1 9
3. Fold the cover of the vacuum opening (12) so that
it points towards the bottom. Insert the tapering end
of the vacuum adaptor with the hose attached into
the opening by making a turning movement (Fig. 7).
4. The cover (2) has two functions. In the normal
position is covers the top of the filter. During suc-
tion, this same cover becomes the closing plate for
suctioning; make sure that the pump is in the OFF
position. Remove the cover, turn it 90º and let it
drop to the inside and place it above the basket.
Make sure that there is no air under the cover.
Trapped air shall make the cover rise.
Warning:
Never try to install the cover in a suctioning
position if the pump is switched on. The cover might
suddenly be pulled down due to the strong suction of the
pump. You may suffer personal injury to your hands or
fingers.
5. When the cover is in place, you can switch on the
pump and put into operation the suction of the pool
floor.
6. When you are finished suctioning, you have to switch
off the pump. Remove the vacuum hose with the
vacuum adaptor connected to it from the pool. Clean
the skimmer basket and your filter. Relocate the cover
to the original position on the top of the skimmer.
Switch on the pump to resume the normal operation
of the pump.
STANDARD SKIMMER PARTS
No. Article
Amt Description
1 1300-1002
1
Skimmer basket
2 1121-1506
1
Skimmer cover
3 1121-1864
1
Skimmer
4 360-1794
1
Sticker
5 1121-1358
1
Skimmer valve
6 340-1600
1
Attachment skimmer valve
7 1107-1275
1
Skimmer valve plus attachment
8 330-1008
4
Screws
9 307-1029
1
Top of gasket
10 307-1030
1
Bottom of gasket
11 340-2089
1
Attachment suction cover
12 348-1028
1
Suction cover
13 340-1590
1
Water suction adaptor
14 330-1004
15 Screws
15 340-2090
1
Skimmer plate
16 340-1591
1
Inlet
17 307-1031
1
Gasket inlet
18 340-1592
1
Inlet adaptor
19 340-1594
1
Closure disk
20 340-1595
1
Eyeball attachment
21 348-1027
1
Eyeball
22 340-1593
1
Closure for the inlet
23 360-2023
1
Operating Instructions Label
