M O N T A G E I N S T R U C T I E C E N T U R Y - P A G I N A 1
A S S E M B L Y I N S T R U C T I O N S S U N L A K E - O V A L - P A G E 1 4
PROCEDURE TO ATTACH LINER
Step 19
With the help of two or three people, raise and hold the
liner up from any three top rail sections. Be careful and
never allow the liner to fall back into the pool. When 1
man is holding the liner, the other folds back the vertical
end caps, the top rails and top connectors from three top
rails (see plan).
INSTALL COPING AND
STABILIZER RAILS
Step 20
Make a return hem as illustrated and smooth the liner
against the wall (see plan). Place the coping over the
liner and the stabilizer rails over the coping after pushing
it together about 15 cm. Replace all parts removed in
step 19 and repeat the same steps for all 3 top rails until
you assembled the entire pool.
large dia. stabilizer
plastic coping
liner
pool wall
return hem
small dia. stabilizer
Now assemble the skimmer, inlet and filter as indicated
on the special enclosed instruction. Then fill the pool to
the indicated level on the skimmer plate.
top rail
top connector
fold back liner from 3 top rails
vertical end
cap
stabilizer rails
