DÖRR EcoGun AS MAN EC, Руководство по эксплуатации

Страница: 36 / 52

WARNING!
Risk of injury due to escaping material
and compressed air
Escaping compressed material can cause
serious injury.
Before carrying out any work:
– Disconnect the system, in which the
spray gun is installed, from com-
pressed air and material supply.
– Secure the system against being
switched on again.
– Depressurize the lines.
10.2 Disassembly
Personnel:
Operator
+ additional qualification high tension
technology
+ additional qualification explosion pro-
tection
Protective equipment:
Use ear protection
Eye protection
Respiratory protection device
Protective workwear
Anti-Static Safety Boots
1. Purge spray gun
Ä 6.7 “Rinsing”.
2. Switch off electrostatic controller.
3. Disconnect the compressed air supply
and material feed. Secure against recon-
nection.
4. Disconnect all lines.
5. Clean spray gun
Ä 7 “Cleaning”.
10.3 Disposal
ENVIRONMENT!
Incorrect disposal
Improper waste disposal threatens the
environment and prevents re-use and
recycling.
– Always dispose of components in
accordance with their characteristic.
Ä 11.6 “Materials used”
– Collect leaked out operating and auxil-
iary materials completely.
– Dispose of operating and auxiliary
materials according to the disposal
provisions in force.
– In case of doubt, refer to the local dis-
posal authorities.
11 Technical data
11.1 Dimensions and weight
Fig. 50: Dimensions
Detail Value
Weight 520g
Height 231mm
Length 197mm
Width 62mm
Technical data
11/2019 EcoGun AS MAN EC - MSG00022EN 36/52