Protective equipment:
Protective workwear
Eye protection
Anti-Static Safety Boots
Requirements:
Disassembly
Fig. 25: Ground electrode
1. Discharge electrode (1) using a
grounding rod (2). In this, pull the trigger
completely.
Fig. 26: Disassemble air cap and nozzle
2. Loosen cap nut (3).
3. Remove air cap (4).
4. Pull the trigger (11) completely.
ð
The needle is pulled backwards so
that it will not be damaged during dis-
assembly of the nozzle (5).
5. Unscrew and remove the nozzle (5) with
the supplied open-end wrench (included
in the tool kit).
6. Release trigger (11).
Fig. 27: Replace O-ring of nozzle
7. Replace O-ring (6) if damaged.
8. Pull the trigger (11) completely.
Fig. 28: Disassemble electrode needle
9. Turn electrode needle (7) counterclock-
wise using the fingers and remove it.
Faults
11/2019
EcoGun AS MAN EC - MSG00022EN
26/52
