DÖRR EcoGun AS MAN EC, Руководство по эксплуатации

Страница: 15 / 52

5. Align air cap (4) as required
Ä 6.5 “Align-
ment of the air cap”.
6. Tighten cap nut (3) by hand.
6.5 Alignment of the air cap
Personnel:
Operator
+ additional qualification high tension
technology
+ additional qualification explosion pro-
tection
Protective equipment:
Protective workwear
Anti-Static Safety Boots
The position of the air cap determines the
alignment of the spray pattern.
Fig. 21: Align air cap
1. Lightly loosen the cap nut (2).
2. Turn the air cap (1) as required for the
desired spray pattern.
3. Tighten cap nut (2) by hand.
6.6 Guiding the spray gun
Personnel:
Operator
+ additional qualification high tension
technology
+ additional qualification explosion pro-
tection
Protective equipment:
Anti-Static Safety Boots
Protective workwear
Eye protection
Respiratory protection device
Use ear protection
Protective gloves
WARNING!
Spark discharging in explosive atmos-
phere
Spark discharging in explosive atmos-
phere can cause explosions. Serious
injury and death could be the conse-
quence.
– Use antistatic protective gloves.
– If no conductive protective gloves are
available, the glove guiding the spray
gun must have a hole in the palm of
the hand. This hole must ensure exten-
sive contact of the palm of the hand
with the handle of the spray gun.
Operation
11/2019 EcoGun AS MAN EC - MSG00022EN 15/52