Fig. 29: Disassemble seal set
10. Unscrew and remove the seal kit (8)
with the supplied socket wrench
(included in the tool kit).
For easier removal of the seal
kit, pull and release the trigger
several times.
11. Release trigger (11).
Fig. 30: Disassemble trigger
12. Loosen both screws (9) on the trigger
(11) using a hexagon socket wrench
and remove them.
13. Remove collar bushings (10).
14. Remove trigger (11).
Fig. 31: Disassemble needle
15. Remove needle (12) and compression
spring (13).
Assembly
16. Insert compression spring (13) and
needle (12) in the housing.
17. Move trigger (11) over the housing until
the bores are one over the other.
18. Insert collar bushings (10) into the
bores.
19. Insert and tighten screws (9).
20. Pull the trigger (11) completely and
keep it pulled.
21. Insert seal kit (8). Tighten carefully.
22. Insert electrode needle (7). Tighten by
hand in clockwise direction.
23. Insert nozzle (5). Tighten carefully.
24. Release trigger (11).
25. Insert air cap (4).
26. Tighten cap nut (3).
Faults
11/2019
EcoGun AS MAN EC - MSG00022EN
27/52
