65
LEADING IN PRODUCTION EFFICIENCY
Operating Manual
© Dürr Systems AG
ED3K_Operating_Manual_Rev02LD_03Lug2020_EN. docx
Rev.02 – 03.07.2020
Once the cycle is selected press the button
to start the cycle.
If the system is equipped with EcoCleaner M, the valves to pull the spray gun’s trigger in the flushing
box are automatically activated
While a cycle program is running, the bar of the related gun is filled in greencolor, to show the
progress of the cycle.
Cycle programs are:
Purge, to clean the system
. The purged programs defined in the recipe in use are launched in
sequence on active guns.
Load, to load the system
. The mixed quantities defined in the recipe in use are loaded in sequence
on active guns.
Paint check.
After having loaded the machine, to spray the mixed product without atomizing air and
make viscosity and flow tests
Calibration A or B
or C. The flowmeters’ impulses are counted to measure the fluid quantity. The
quantity of pulses generated per liter has to be configured through a specific procedure
-
Log on with the access level 3
-
There must be only one spray gun selected in Mode Switch page, gun 1 in the example picture
-
Once you have selected the required calibration, the calibration pop-up window appears.
