62
LEADING IN PRODUCTION EFFICIENCY
Operating Manual
© Dürr Systems AG
ED3K_Operating_Manual_Rev02LD_03Lug2020_EN. docx
Rev.02 – 03.07.2020
8.5.1.11 Change calibration data
Flowmeters need to be parameterized by entering the number of pulses generated for each liter of
flowing material. This value can be figured out with a specific measure carried out in a specific cycle
program.
The number of impulses per liter, however, can be entered manually as described below, for all the
channels A, B and C.
Different calibration values are associated to each recipe.
Use the button
to open the window in order to change the calibration values.
In this window, the calibration values for channel A, B and C can be entered.
Invalid input range: x <0
Figure 37 Calibration page
The first unnumbered row on the top, is used to enter a value in the table: by tapping on the input
fields a key box appears where you can enter the calibration values.
In the right center of the screen there are buttons allowing to scroll the calibration values list: you
can browse them one at the time, ten at the time go to the to last and to the first row.
