Safety Station Technical Service Manual
11
10/17/2011
GD-99009 Rev. B
I n s t ru c t ion s f or Use
P r o cessi ng C anis te rs :
S te p 1 – Lo ad Can i ste rs in to U ni t (Fig ure 6 )
Place a canister into the left or right ring. Turn the canister clockwise until it seats in the ring. Continue turning the
canister clockwise until a “BEEP” is heard. The unit has the ability to process one or two canisters. If there is another
canister that needs to be processed, place the second canister into the open ring and repeat the above process.
S te p 2 – Sta rt the TPS S (Fig ure 7)
Close the TPSS lid. With the lid closed, the control panel will indicate which rings are securely holding canisters with the
message “L Can”, “R Can”, or “L Can R Can”. Press the green “WASH” button once for normal operation. An
extended cleaning cycle can be initiated by pressing the “WASH” button twice within five seconds.
Figure 7 – Safety Station Control Panel
Figure 6 – Load Canisters
