25
ED250
01-2018
DL4614-080
dormakaba ED250 IG Service Manual
Chapter 16
ED250 Parameter
A156.10 standard
Parameter
Function
Factory setting
Adjustment range
Para. Requirement
So
Opening speed
automatic
mode
Swing door opening speed,
automatic mode.
25°/s
8°/s - 60°/s
10.2.1
Swing door opening time to 80°, not less than
1.5 s.
Sc
Closing speed
automatic
mode
Swing door closing speed,
automatic mode.
25°/s
8°/s - 60°/s
10.2.5
Swing door closing time to latch check.
Fo
Static force
in opening
direction
Static force on door closing
edge in opening direction.
13.5 lb f
[60 N]
4.5 lb f -
33.7 lb f
10.2.2
Not to exceed 30 lb f measured
1" from lead edge of door.
Fc
Static force
in closing
direction
Static force on door closing
edge in closing direction.
13.5 lb f
[60 N]
4.5 lb f - 33.7 lb f
10.2.7
Not to exceed 30 lb f measured
1" from lead edge of door at any point in
closing cycle.
bc
Backcheck
Checking or slowing down of
door speed before door being
fully opened.
10°
5° - 40°
10.2.3
Shall occur at not less than 10° of full open
position.
dd
Hold open
time
Open time for swing doors
using sensors or control mats
upon loss of detection.
5 s
0 s - 30 s
0 s - 180 s
(professional
upgrade card)
10.2.4
Minimum of 1.5 seconds after loss of detection.
Latchcheck
Checking or slowing down of
door speed before door being
fully closed.
Not adjustable
10.2.6
Not less than 10° from closed position.
The door will not close through the final 10° in
less than 1.5 s.
hS
Reference
Chapter 17for
parameter
detail.
Support for manual mode in
door closed position.
10.2.8
Manual opening force in event of power failure.
Not greater than 30 lb f applied 1" from lead
edge to open.
hA
Adjustment, door activation
angle.
hF
Power assist function.
16.1 A156.10 Power operated pedestrian doors
The following table references portions of content from ANSI/BHMA A156.10. Refer to the standard, available
through ANSI or BHMA for additional information. Standard material reprinted with BHMA permission
.
16.1.1 Door measurements, power operated swing door.
"D" door width ,
minimum
(inches)
"W" door weight,
maximum
(pounds)
"T" closing time,
minimum, to latch
check (seconds)
36 or less
100
2.0
36
140
2.3
42
110
2.3
42
150
2.7
48
120
2.8
48
160
3.2
16.1.2 A156.10, swing door closing time to latchcheck
16.1.3 Other door weights and widths
Closing time T = (D
W
)/188
D = Width of door in inches.
W = Weight of door in pounds.
T = Closing time to latch check in seconds.
16 ANSI/BHMA standards
