22
ED250
01-2018
DL4614-080
dormakaba ED250 IG Service Manual
Chapter 13
1
2
13.1.1 Set braking circuit plug position
1
Power switch
2
Braking circuit 3 pin
socket
Fig. 13.1.2 Plug position, pull
Fig. 13.1.3 Plug position, push
1
Braking circuit plug
2
Braking circuit
3 pin socket
1
Braking circuit plug
2
Braking circuit
3 pin socket
13.1.1 Braking circuit plug
Braking circuit plug is positioned in its 3 pin
socket for either a door pull or push
configuration.
• Braking circuit plug is factory installed in
the left 2 pins, the pull position.
(Fig. 13.1.2
).
NOTICE
Refer to Para. 17.2, configuration
parameter
AS
(installation type)
for door in-ground push and pull
configurations.
WARNING
Braking circuit will not work correctly
if braking circuit plug is improperly
positioned, or if an incorrect plug is
used!
Door may close at high speed and/
or be difficult to open!
13.1.2 Change braking circuit plug position.
To change plug position for push door
application, install plug in right 2 pins,
toward user interface (Fig. 13.1.3).
WARNING
Insure power switch is OFF before
changing plug position!
1
2
Fig. 13.1.1 ED250 PCB bracket assembly
13 Set braking circuit plug position
1
2
