The harness covers help to
provide comfort to the
infant’s neck. For harness
covers to fit correctly you
may have to push the ends
of the covers through the
harness slots.To remove
the harness covers you will
have to; unthread the harness system from splitter plate
(see “Adjusting Harness System” section), remove
harness covers and rethread harness straps to splitter
plate (see “Adjusting Harness System” section).
20
19
This child restraint has 2
recline positions: Upright
(forward-facing only) and
Reclined.
Rear-facing - Must be
fully reclined.
Forward-Facing -
Reclined or upright.
Reclining the Child Restraint
1
2
For reclined position, pull
down to unlock recline
stand and fold under seat.
For upright position, pull
recline stand out from
under seat and push up to
lock in place.
The infant insert is
designed to support the
infant’s head and neck.
Make sure that the insert
does not cover the infant’s
face in any way. Remove
the insert when the infant’s
head has reached the top
inside part of the infant insert. To remove the infant
insert, you will have to unthread the harness system, (see
“Removing Seat Pad for Cleaning” section), and remove
the insert. Rethread harness system. (see “Installing
Harness” section)
Removing Infant Insert
(on select models)
The pillow provides extra
comfort for your toddler.
To remove pillow, pull
apart fastening strips and
remove pillow. To replace,
pull top fastening straps
over top of shell and
attach to top of pad.
Removing Pillow (on select models)
Installing Cup Holder
Cup holder can be on
either side. Hook cup
holder on side of shell.
Push down firmly on cup
holder until the bottom
snaps onto side of shell.
Removing Harness Covers on Select
Models
4358-3951B Can Scenera Eng 6/20/07 8:48 AM Page 25
