DoorHan HYBRID 02, Инструкция по установке и эксплуатации

Страница: 2 / 36

2
ENGLISH
General information
This is the installation manual for the HYBRID 02.
The manual contains important information for the
installation, safe operation and maintenance of the doors.
Please, keep this manual.
In case of any difficulties or misunderstanding during the
installation of the doors, please contact your technical support
service (see «Technical support service»).
It’s strongly forbidden to use and install any parts that are
not the original parts of the doors supplied by the manufacturer.
Such parts may be installed only with the written confirmation
of the manufacturer.
Attention!
Keep children away during the installation of the
doors. Some parts can injure them.
For the installation of the operator, please read carefully
its specific installation manual and follow all the instruction to
prevent any damages to the doors and your house.
Before you start to install the doors, please, check that the
opening has been prepared according to the supplied technical
data.
The opening of the door must be free of any obstacles.
General installation conditions
Installation team recommendations:
• The installation of the doors can be done by 1 person.
However, the manufacturer recommends the installation to
be carried out by 2 persons including 1 certified electrician.
• Average installation time is 3 hour.
• Before starting the installation, please make sure, that you
have all the tooling needed for it (see page 20).
Installation responsibility
Due to the impossibility to control the installation process
by the manufacturer, the installer is held responsible and must
prevent any possible risks. He must ensure good quality of
fixation to the walls of building.
In any case the manufacturer of the doors will not bear
responsibility for possible financial loss, property damages,
injuries, or any other possible risks that may appear as the result
of the installation.
Operation
• The doors should move up and down without difficulty.
• The doors should be balanced.
• Manual opening or closing of the doors must be done only
using the provided handle. Attention! Never put your fingers
between the panels, neither from outside nor from inside
the building.
• Lock the door using special latch or mechanical lock.
• The parts of the doors should be well lubricated.
• Keep children and animals out of the doors operation area.
• Do not put any obstacles inside the opening and doors track
path.
Technical problems
In case of any problems with the product, please call the
technical support service.
Technical support service
You can find the information about the hot line for the
technical support in the purchasing contract you have got from
your vendor.
Please note, that the manufacturer has the right to change
the technical specification of the product without notifying the
user.
Thank you very much for purchasing our sectional doors.
SYMBOLE
x
x
gate element
fastening element
set level
unpack
note
information in mounting card
required amount of spring turns
drill
incorrect installation
correct installation
apply force
dismantling
with operator
without operator