Dolphin TCM 330 Скачать руководство пользователя страница 23

Страница: 23 / 62

F-710-017, V1.2 TCM 330 / TCM 330U User Manual | v1.1 | August 2016 | Page 23/62

USER MANUAL V1.1

TCM 330 / TCM 330U

Wireless LED Controller Module

FUNCTIONAL INFORMATION

4.1

General description

TCM 330 allows implementation of LED zone controller using wireless technology to com-

municate with other self-powered EnOcean based products.

LED zone controllers based on TCM 330 provide simple solutions for dimming control of LED

lighting. They can be wirelessly linked to EnOcean-based motion sensors, rocker switches

and a light level sensor.

Central control is possible by linking the LED zone controller to a central controller or via a

gateway to building automation systems like BACnet.

LED zone controller based on TCM 330 can be wirelessly configured over the air using the

EnOcean Remote Commissioning standard. Configurable parameters are marked in Italics

in the following chapters.

4.2

System components

Wireless lighting control systems based on LED zone controllers contain one or several of

the following components:

LED zone controllers

LED zone controllers receive input from linked devices and controls the LED light level

using its 0-10V and relay outputs. The LDE zone controller is connected to an LED driver

which in turn supplies the LED string of the light source.

Wireless switches

Wireless switches can be used to send switch on / off and dim up / down commands to

the LEDR

Wireless occupancy sensors

Wireless occupancy sensors can be used to signal presence or absence of persons in

their vicinity to the LEDR

Wireless light level sensors

Wireless light level sensors can be used to report the amount of external light (typically

daylight) being present in their vicinity

Central controller

Central controller can be used to provide a centralized control and user interface to the

lighting control system. It can also act as a gateway to a building automation system like

BACnet.

Demand response controller

Demand response controller can instruct LED zone controller based on TCM 330 to tem-

porarily reduce output setting to conserve energy during periods of energy shortage

Содержание TCM 330































































Результаты поиска

Содержание TCM 330

Отзывы:

Похожие инструкции для TCM 330

Бренды по названию

Популярные бренды

Dolphin TCM 330, Руководство пользователя

Результаты поиска

Содержание TCM 330

Отзывы:

Похожие инструкции для TCM 330

Бренды по названию

Популярные бренды