Docomo FOMA SO902I, Руководство пользователя, Страница: 51 / 372

49
Placing/Receiving Calls
Placing a Call by Specifying a Condition
When you place a call, you can select a call type and call condition from the Call menu, for
example, whether or not to notify a recipient of your phone number.
Example: Placing a voice call
1
Enter a phone number in the stand-by display and press (Call).
Ｖｏｉｃｅ ｃａｌｌ
Ｖｉｄｅｏｐｈｏｎｅ
ＰｕｓｈＴａｌｋ
[Voice call] : Select a call condition for a voice call.
[Videophone] : Select an image to be sent (My side/Substitute image/Select sub
image) and the communication speed (64K/32K) to be used when
you place a videophone call.
[PushTalk] : Select whether or not to notify your phone number when you originate
a PushTalk call.
2
Select [Voice call] and press .
Ｃａｌｌ
Ｃａｌｌ ｗｉｔｈ ＩＤ
Ｃａｌｌ ｗｉｔｈ ｎｏ ＩＤ
Ｐｒｅｆｉｘ
[Call] : The voice and videophone calls follow the setting of the Set
Notification. The PushTalk call follows the setting of the Caller ID.
[Call with ID] : Your phone number (caller ID) is notified to the recipient.
[Call with no ID] : Your phone number (caller ID) is not notified to the recipient.
[Prefix] : Place the voice call with the saved prefix selected (this item
appears only when a prefix is saved) (P.50).
[Int’l call] : Place the voice or videophone call with the saved international
access number selected (P.51).
[Country code] : Place the voice or videophone call with a country code selected
(P.52).
3
Select a call condition and press .
The call is made according to the selected call condition.
● If the Multi Number call for Multi Number is set to [ON], the Additional No. selection menu appears after step 1.
Select an Additional No. to be used and then go to step 2.
Call conditions