Docomo FOMA SO902I, Руководство пользователя, Страница: 278 / 372

276
Network Services
The Call Waiting Service
The beeps notify you of an incoming call that arrives
during a call. You can answer the incoming call by putting
the current call on hold.
• If the Caller ID Display Request Service is set to “Activate” and
you receive a “Reject” call, the caller ID request guidance is
played back (the Call Waiting Service cannot be used in this
case).
• The Call Waiting Service is not available in the following cases:
- During a call to the number 110, 119, 118, 117 or 104
- While performing 64K data communications
- While dialing, or when waiting for the recipient to pick up
your call
- While connecting to the Voice Mail Service Center
- While the call is forwarded to the specified number
- While dialing a 4-digit number such as 1411 (starting the
Voice Mail Service) or 1420 (stopping the Call Forwarding
Service) in order to perform various network service settings.
- During a videophone call (The call is recorded as a missed
call in the Received record.)
• The caller is charged for the call even if the call is put on hold.
Starting the Service
• To use the Call Waiting Service, set the Arrival Call Act to
[Answer]. You can use the Call Waiting Service regardless of
the Activate/Deactivate operation of the In-call Arrival Act.
1
From the Menu, select [NW Services] → [Call Waiting]
→ [Activate] and press .
2
Select [Yes] and press .
The Call Waiting Service is activated.
Stopping the Service
1
From the Menu, select [NW Services]
→
[Call Waiting]
→ [Deactivate] and press .
2
Select [Yes] and press .
The Call Waiting Service is deactivated.
Checking the Settings
1
From the Menu, select [NW Services] → [Call Waiting]
→ [Check setting] and press .
The settings of the Call Waiting Service are displayed.
Receiving an Incoming Call During a Call
• When there is an incoming videophone call during a voice call,
you can end the voice call to receive the videophone call.
1
When receiving a call, press (Call).
The current call is put on hold and the incoming call can be
answered.
When a call is put on hold, the message “Connecting” appears.
• Every time you press (Switch), you can switch between
the calls.
To disconnect a call put on hold
From the Function menu, select [Release Hold Call].
Ending the Call to Answer an Incoming Call
1
When receiving a call, press .
The current call is disconnected, and the ring tone sounds for
the incoming call.
2
Press .
The incoming call can be answered.
The Call Forwarding Service
If there is an incoming call when you are outside of the
service area or the FOMA terminal is powered OFF, it is
forwarded to a forwarding number saved in advance,
such as to your office or home.
• You can save one phone number to which calls can be
forwarded.
• You can answer the call if it is before forwarding starts. The
duration before forwarding starts (ring time) can be changed
(P.277).
• When the Voice Mail Service is set to “Activate”, the Call
Forwarding Service is automatically deactivated.
• If the Caller ID Display Request Service is set to “Activate” and
you receive a “Reject” call, the caller ID request guidance is
played back (the Call Forwarding Service cannot be used in
this case).
• The Call Forwarding Service may not be available for some
charging plans.
• You can use the network security code to operate the Call
Forwarding Service from a general push-button telephone and
public phone. Set the Remote Control to [Activate] in advance.
• When you receive a videophone call, it is disconnected if the
forwarding number is not a 3G324M compliant videophone-
compatible terminal.
Basic Flow of the Call Forwarding Service
Step 1
Save the forwarding number.
Step 2
Activate the Call Forwarding Service.
Step 3
Receive a call on the FOMA terminal.
Step 4
If you do not answer the call, it is automatically forwarded
to the specified forwarding number.
Step 5
The caller is connected to the forwarding number.
The Call W
aiting Service/
The Call For
war
ding Service