Docomo FOMA SO902I, Руководство пользователя, Страница: 256 / 372

254
Displaying/Editing/Managing Data
Storage infor
mation/Infrar
ed communications
Checking the Memory Space of
the FOMA Terminal
You can display the memory use status of the FOMA
terminal. You can also check the volume used up by the
category-specific Data box and i-
α
ppli memories.
• The displayed data amount is an estimated value and not
accurate.
1
From the Menu, select [Settings] → [Management]
→
[Storage info] and press .
（Ｕｎｉｔ：ＫＢ）
Ｆｕｌｌ ｃａｐ． ３０，７２０
Ｕｓｉｎｇ １４，２８９
Ｍｙ ｐｉｃｔｕｒｅ ７，４７３
ｉ−ｍｏｔｉｏｎ ４，６３８
Ｍｅｌｏｄｙ ８０
Ｃｈａｒａ−ｄｅｎ ４５
Ｓｔｏｒａｇｅ ｉｎｆｏｒｍａｔｉｏｎ
To change the unit
Press (Unit chg) to switch temporarily between the KB
and MB displays.
2
Select an item and press .
（Ｕｎｉｔ：ＫＢ）
Ｒｅｍａｉｎｉｎｇ １７，０１６
Ｕｓｉｎｇ ７，４７３
Ｒｅｇｉｓｔｅｒａｂｌｅ １０００
Ｒｅｇｉｓｔｅｒｅｄ ３２
Ｍｙ ｐｉｃｔｕｒｅ ｉｎｆｏ
● Preinstalled data other than i-
α
ppli is not included in the
data amount.
In Case of Insufficient Memory Space
If there is not enough free memory space when you save
or download data or software in My picture, i-motion,
melody, Chara-den, My document of the Data box, or
i-
α
ppli, select and delete data that is no longer required
from the same category, allocate the save area, and then
save the new data/software.
Example: When the memory space is insufficient while downloading
software
1
Download the software.
The screen informing memory shortage appears.
[Slct delete data]:
Delete unnecessary software and continue to download
the software.
[Cancel]:
Cancel downloading.
2
Select [Slct delete data] and press .
ソフト一覧
Ｄｏｗｎｌｏａｄｅｄ ｓｏｆｔｗａ
Ｕｓｅｄ（Ｆｏｌｄｅｒ） ３２０ＫＢ
Ｓｈｏｒｔａｇｅ ６４ＫＢ
ｐｐｌｉ １２／２４
3
Select a folder → software and press .
ＸＸＸ ｇａｍｅ
ＸＸＸ ｑｕｉｚ
Ａｑｕａ ＸＸＸ ｆｒｉｅｎｄ
ＸＸＸ Ｓａｎｇｕｏｚｈｉ
Ｕｓｅｄ（Ｄａｔａ） ６４ＫＢ
Ｓｈｏｒｔａｇｅ ６４ＫＢ
ソフト一覧 １／１２
ＸＸＸ ｇａｍｅ
ＸＸＸ ｑｕｉｚ
Ａｑｕａ ＸＸＸ ｆｒｉｅｎｄ
ＸＸＸ Ｓａｎｇｕｏｚｈｉ
Ｕｓｅｄ（Ｄａｔａ） ６４ＫＢ
Ｓａｖｉｎｇ ａｖａｉｌａｂｌｅ
ソフト一覧 １／１２
To cancel the selection
Press (Rel.).
4
Press (Delete), select [Yes], and press .
The selected software is deleted and then downloading starts.
●
If you delete preinstalled Chara-den files, it does not help
you increase the save area.
What is the Infrared Communications?
You can send and receive the Phonebook, Schedule, Text
memo, Bookmark, mail, image, movie, melody, PDF data,
and ToruCa card to/from a mobile phone equipped with
the infrared communications function. To send/receive
all entries, you need a 4-digit authentication password
preset with a communication target recipient/sender.
The FOMA terminal can also do much more in conjunc-
tion with other devices equipped with the infrared com-
munications function by using the infrared communica-
tions feature of i-
α
ppli.
• There are some data that cannot be exchanged even if other
devices are equipped with the infrared communications function.
• The infrared communications of the FOMA terminal follows IrMC
version 1.1. Even if other devices follow IrMC version 1.1, there
may be data that cannot be exchanged properly depending
on the software.
• You cannot perform infrared communications during a call or
i-mode/packet/64K data communications, or when the Lock
all, PIM lock, Self mode, or Lock key is set.
• Phone call, i-mode, data exchange, etc. are not available during
the infrared communications because the FOMA terminal is in
the similar state as outside of the service area.
Using the Infrared Communications
• The FOMA terminal and the external device can be used within
20 cm apart. The infrared data port must be kept pointed at
the other device until the data exchange ends.
• If used under direct sunlight, fluorescent lamp or near other
infrared devices, the infrared data exchange may not function
properly.
Infrared data port
Within 20 cm
Reception angle:
± 15 degrees
off axis