Docomo FOMA SO902I, Руководство пользователя, Страница: 231 / 372

229
i-Channel
Display i-Channel
Displaying the i-Channel
1
Press (i.ch) in the stand-by display.
The channel list appears.
2
Select a channel and press .
● You may receive specific information when the channel list
is displayed, depending on the terms of use.
When You Receive i-Channel
→ 最高１４℃ １０
When you receive information, the
information is automatically run as
Telop text on the stand-by display.
To display the channel list
Press (i.ch).
Telop
● When you receive i-Channel information, “ ” → “ ” flashes.
Even if you receive information, the FOMA terminal does
not sound the ring tone or vibrate, and the incoming
indicator does not operate, either.
● You can adjust the scrolling speed of the Telop text and
also set to hide the Telop text (P.105).
● If you switch the UIM to another i-Channel-compatible
terminal, the Telop text does not appear. When the
information is automatically updated or if you press
(i.ch) to receive latest information, the Telop text starts
running automatically.
●
If you change the host, the Telop text may be turned off
and information may not be automatically updated. To
receive latest information, press
(i.ch) and display the
channel list. The Telop text starts running automatically.
●
You can change the i-Channel host using the Host selection
(P.171). Normally, you do not need to change the host.
●
When you cannot receive information because the FOMA
terminal is powered OFF or outside of the service area,
etc., you can receive it by pressing
(i.ch) and selecting
a non-subscriber channel.
● You may not be able to receive information in default status.
In this case, you can press
(i.ch) to receive information
and the information is automatically run as Telop text on
the stand-by display.
● Telop text is not displayed in the following cases.
-
When the Lock all is set
- When the PIM lock is set
- When the Public mode (Driving mode) is set
- When the UIM is not inserted
- When the i-Channel or i-mode service is canceled