Docomo FOMA P704i, Руководство пользователя

Страница: 480 / 495

43
4
The display appears to indicate the
connecting state.
In this period, the system performs logon processing to confirm the
user name and password.
5
After the connection is completed, click “
閉じ
る
(Close)”.
p You can start the browser software to browse web pages, use
e-mail and so on.
Information
p Use the FOMA phone with the dial-up setting completed for dial-up
connection. To connect another FOMA phone, you may need to
reinstall the communication setup files (driver).
p
The power consumption of the FOMA phone increases during
communication.
p During packet communication, the communication state appears on the
FOMA phone.
“ ” (Communicating, data sending)
“ ” (Communicating, data receiving)
“ ” (Communicating, no data sending/receiving)
“ ” (Outgoing or being disconnected)
“ ” (Incoming or being disconnected)
p During 64K data communication, “ ” appears on the FOMA phone.
1
Click the dial-up icon on
the task tray.
2
Select “ 接続または切断 (Connect or
disconnect)”, then click “ 切断 (Disconnect)”
Click “ 閉じる (Close)”.
If you cannot connect to network (if you fail a dial-up
connection), confirm the following items:
The operation below explains how to set the 64K data
communication without using “FOMA PC setup
software”.
Disconnecting
Information
p The communication line may not be disconnected by only exiting the
browser software. To surely disconnect the communication line,
perform this operation.
p The baud rate displayed on your personal computer may be different
from the actual one.
When you cannot connect to network
If this error occurs Confirm those:
Your personal
computer cannot
recognize “FOMA
P704i”.
･
Confirm whether your personal computer satisfies
the operating environment (see page 2).
･ Confirm whether “P704i communication setup files”
(driver) is installed in your personal computer.
･ Confirm whether the FOMA phone is connected to
your personal computer and powered on.
･ Confirm whether the FOMA USB Cable (option) is
securely connected.
You cannot connect
to the access point. ･ Confirm whether the ID (user name) and password
are correct.
･
When you need to notify your caller ID such as
when using “mopera U” or “mopera”, make sure
“184” is not prefixed to the phone number.
･
Confirm that “
フロー制御を使う
(Use the flow
control)” is checked in the modem properties.
･ If you cannot connect to the access point even
after confirming above, contact your Internet
service provider or network administrator for the
setting method, and so on.
Set 64K Data Communication