Docomo FOMA P704i, Руководство пользователя

Страница: 162 / 495

160
Camera
You can use the camera to scan JAN codes and QR
codes and store them as data.
From the scanned data, you can make calls, compose
i-mode mail messages, and access Internet web
pages, and so on.
Bar Code Reader
Using Bar Code Reader
■
When scanning with Bar Code Reader
p Scan a code with the camera about 10 cm away from the
code. However, when the code is small, bring the
camera close to it slowly so that the code is scanned
larger within the guide frame.
p
Scan so that the camera is in parallel with the code.
■ JAN Code
JAN Code is a bar code that denotes numerals with
the vertical bars of a different width.
You can scan 8-digit (JAN8) and 13-digit (JAN13) JAN
codes.
p
“4942857112597” is
displayed when you scan
this bar code with the
FOMA phone.
■
QR Code
QR Code is one of the 2-dimensional codes that
denotes data in the vertical and horizontal directions.
Kanji, katakana, alphanumeric characters, and
pictographs are displayed.
Some QR codes have image or melody information.
p “ 株式会社 NTT ドコモ ” is
displayed when you scan
this QR code with the
FOMA phone.
< >
Guide frame
You can store up to 5 scanned codes.
You can scan up to 16 divided QR codes.
1
m
LifeKit Bar code reader
Scan code
p
You can paste the Bar Code Reader menu to the
desktop. (See page 122)
2
Fit a code to be scanned to the guide frame
and press
X o
.
When the focus is locked, a
confirmation tone sounds
and the cross mark becomes
green.
p
Press
l
( / ) to set the photo light to
“ON” or “OFF”. The photo light does not turn on while
the FOMA phone is closed.
p Press
i
( ) and select “Brightness”; then you
can adjust brightness to -3 (dark) t3 (bright).
p Press
C o
to show the reduced display, and press
V o
to return to the former display.
Scan a Code
At Bar Code Reader
start-up
Photo light: OFF
Brightness:
±
0
Zoom: Magnified view
Bar Code Reader Selection display
Scanning Code display