Docomo FOMA P704i, Руководство пользователя

Страница: 46 / 495

44
Before Using the Handset
If the date and time, Terminal Security Code, or Keypad Sound is not set, the Initial Setting display appears when the
power is turned on. You can set the initial settings also from each menu function separately.
1
Turn on the power YES
p When the display for entering your Terminal Security Code, PIN 1 code, or PIN 2 code
appears, follow the operation on page 43.
2
Set the date and time.
You can select “Auto time set ON” or “Auto time set OFF” for setting the time. (See page 44)
3
Set your Terminal Security Code.
You can set your Terminal Security Code required for setting functions. (See page 128)
1. Enter “0000” Enter your new Terminal Security Code (four to eight digits) YES
4
Set Keypad Sound.
You can set the keypad whether to make a sound. (See page 105)
1. ON or OFF
5
YES Perform Software Update.
You can check whether you need to update software programs in the FOMA phone, and if necessary, update the
software programs. (See page 410)
You can select whether to correct the time automatically or set it manually.
1
m
Settings Clock Set time Auto time set ON or Auto time set OFF
Auto time set ON
. . . . . Corrects the date/time automatically. The setting is completed.
If the time is not automatically corrected such as when “ ” is displayed and the date/time has not been set, the
display for manually correcting the time appears. Follow step 2 to set the date/time.
Auto time set OFF
. . . . . Sets the date/time manually.
p When “Notice call cost” is set to “ON”, you need to enter your Terminal Security Code.
Initial Setting
Executing Initial Settings
< >
Information
p When an unset function is found, the Initial Setting display for the unset function or the confirmation display asking
whether to update software programs appears, each time you turn on the power.
p The completed settings are valid even when total setting is interrupted by an incoming call or canceled by pressing
h
or
r
midway.
p
When the power is automatically turned on by alarm notification, the Initial Setting display does not appear even if there is
any unset function.
+ m - 3 - 1
Set Time
Setting Date and Time
Setting at purchase Auto time set ON
< >