Docomo FOMA P702iD, Руководство пользователя, Страница: 517 / 522

32
AT _ DGPIR=n
[M]
This command is valid at dialing/
receiving calls.
In the dial-up network setting,
you can add “186” (notify) or
“184” (not notify) to the phone
number of the access point.
(See page 22) n=0: Uses the APN as it is. (default)
n=1: Adds “184” to the APN. (always not notify)
n=2: Adds “186” to the APN. (always notify)
AT
_ DGPIR?: Displays the current setting.
AT _ DGPIR=0
OK
AT
_ DGPIR?
_ DGPIR:0
OK
AT
_
DRPW
[AT][M]
Displays the output power index
for receiving.
(0: minimum value to 75:
maximum value)
−
AT
_
DRPW
_ DRPW:0
OK
+++
[M]
Changes to the online command
state without disconnecting the
line when the escape sequence
is executed in the online mode.
− −
AT+CEER
[M]
Displays the reason why the
preceding call was disconnected. <report>
Disconnection reason list (See page 37) AT+CEER
+CEER:36
OK
AT+CGDCONT
[M] Sets the access point (APN) for
when dialing for packet
communication. See page 36. See page 36.
AT+CGEQMIN
[M]
Registers the reference value to
judge whether the system
permits QoS (Quality of service)
reported from the network at
establishment of PPP packet
communication. AT+CGEQMIN=[parameter]
See page 36.
AT+CGEQMIN=?
Lists the settable values.
AT+CGEQMIN?
Displays the current setting. See page 36.
AT+CGEQREQ
[M]
Sets QoS (Quality of service) to
be requested to the network at
dialing of the PPP packet
communication. AT+CGEQREQ=[parameter]
See page 36.
AT+CGEQREQ=?
Lists the settable values.
AT+CGEQREQ?
Displays the current setting. See page 36.
AT+CGMR
[M]
Displays the version of the
FOMA phone. − AT+CGMR
1234512345123456
OK
AT+CGREG=n
[M]
[&F][&W]
Sets whether the network
registration state is notified.
Displays whether you are inside
or outside the service area
according to the returned
notification. n=0: Not notified. (default)
n=1: Notified at switching between the inside and
outside of the service area.
(Inquiry)
AT+CGREG?
+CGREG: <n>,<stat>
n: Set value
stat:
0: Outside packet area
1: Inside packet area
4: Unknown
5: Inside packet area (during roaming)
AT+CGREG=1
OK
(set to “Notified”)
AT+CGREG?
+CGREG:1,0
OK
(means the outside of the service
area)
(when moved from the outside to
the inside of the service area)
+CGREG: 1
AT+CGSN
[M]
Displays the serial number of the
FOMA phone.
−
AT+CGSN
123456789012345
OK
AT+CLIP=n
[AT][M]
[&F][&W]
Enables to display the other
party’s caller ID on the personal
computer at reception of 64K
data communication or
video-phone calls. n=0: Does not notify. (default)
n=1: Notifies.
Result: +CLIP:<n>,<m>
m=0: NW setting not to notify caller ID at calling
m=1: NW setting to notify caller ID at calling
m=2: Unknown
AT+CLIP=0
OK
AT+CLIP?
+CLIP:0,1
OK
AT command Outline Parameter/Explanation
Command execution
example