Docomo FOMA P702iD, Руководство пользователя, Страница: 505 / 522

20
4
Open the “ モデム (Modem)” tab, confirm the
COM port number in the “ 接続先 (Access point
name)” field of “FOMA P702iD”, then click
“OK”.
p The COM port number you confirmed is used to specify an access
point name (APN) (see page 20).
p
The contents on the property display and COM port number vary
depending on the personal computer you use.
The operation below explains how to specify an access
point name (APN) for packet communication. You can
register up to 10 access point names (APNs), which are
managed with cid1 to cid10 (see page 21).
When using mopera U or mopera, you do not need to
specify access point name (APN).
The operation below is the example where you use
“XXX.abc” as the access point name (APN) and use the
FOMA USB Cable (option). For the actual access point
name (APN), contact your Internet service provider or
network administrator.
The setting here will be the access point number for
dial-up network setting (see page 22).
1
Connect the FOMA USB Cable (option) to the
FOMA phone.
2
Turn on the power to the FOMA phone, then
connect the FOMA USB Cable, which is
connected to the FOMA phone, to your
personal computer.
Specify an Access Point Name (APN)
For Windows
®
XP
3
Start Hyper Terminal.
“ スタート (Start)” → “ すべてのプログラム (All programs)” → “ アクセ
サリ (Accessories)” → “ 通信 (Communications)” → Open “ ハイパー
ターミナル
(Hyper Terminal)”.
After starting Hyper Terminal, when the message “ 『既定の Telnet 』
プログラムにしますか? (Select the specified Telnet program?)” is
displayed, set as desired. Contact the maker of your personal
computer and Microsoft Corporation for the setting contents.
p For Windows
®
2000 Professional, “ スタート (Start)” → “ プログラム
(Programs)” → “ アクセサリ (Accessories)” → “ 通信
(Communications)”
→
Open “
ハイパーターミナル
(Hyper
Terminal)”.
4
Enter any name in the “ 名前 (Name)” field,
then click “OK”.
Here, “Sample” is entered as an example.
5
Select the connection method.
<When you can select the COM port number of
“FOMA P702iD”>
Select the COM port number with which you install the “FOMA
P702iD” in the “ 接続方法 (Connection method)” field, then click
“OK”.
Then, go to step 6.
p Here, “COM3” is selected as an example. See page 19 for the
COM port number of “FOMA P702iD” you should actually select in
the “ 接続方法 (Connection method)” field.