Docomo FOMA P702iD, Руководство пользователя, Страница: 504 / 522

19
The operation below explains how to set a connection
for packet communication without using the “FOMA PC
setup software”.
The packet communication uses AT commands to carry
out the settings from a personal computer. To specify
settings, communication software to enter AT command
is required. “Hyper Terminal”, which is attached to
Windows
®
as the standard software, is used here for
explanation.
When using DoCoMo Internet access service mopera U
or mopera, you do not need to specify an access point
name (APN) (see page 20).
You can set “caller ID notified/not notified” (see
page 22) as required. (You need to set “caller ID
notified” when using mopera U or mopera.)
<Packet communication setting flow using AT commands>
To manually carry out the communication setting, you
need to specify a COM port number, which is assigned
to the “FOMA P702iD” modem embedded after you
install the “P702iD communication setup file” (driver).
The confirmation method varies depending on the
operating system of your personal computer.
p
When using DoCoMo Internet access service mopera U or mopera,
you need to specify no access point name (APN); therefore, you do
not need to confirm the modem.
Setting Dial-up Network
Set Packet Communication
Confirm the COM port number (See page 19)
Start the communication software that enables the
entry of AT commands (See step 3 on page 20)
Set an access point name (APN) (See step 7 on page 21)
Set “caller ID notified/not notified”
(See step 2 of “Set Caller ID Notified/Not Notified” on
page 22)
Set others (See page 29)
Exit the communication software (See step 9 on page 21)
■ AT commands
p The AT commands are used to control a modem. The FOMA phone,
which conforms to the AT commands, supports some extended
commands and unique AT commands.
p By entering AT commands, you can carry out detailed setting for packet
communication and FOMA phone, and confirm (display) the setting
contents.
p If the entered AT command is not displayed, enter “ATE1 ”.
Confirm COM Port Number
1
“
スタート
(Start)” Open “
コントロールパネ
ル
(Control panel)”.
2
From “ プリンタとその他のハードウェア
(Printer and the other hardware)” in “ コント
ロールパネル (Control panel)”, open “ 電話とモ
デムのオプション (Phone and modem
options)”.
3
If the “
所在地情報
(Address information)”
display appears, enter “
市外局番/エリアコード
(Area code)”, then click “OK”.
4
Open the “ モデム (Modem)” tab, confirm the
COM port number in the “ 接続先 (Access point
name)” field of “FOMA P702iD”, then click
“OK”.
p The COM port number you confirmed is used to specify an access
point name (APN) (see page 20).
p
The contents on the property display and COM port number vary
depending on the personal computer you use.
1
“
スタート
(Start)” “
設定
(Setting)” Open
“
コントロールパネル
(Control panel)”.
2
Open “ 電話とモデムのオプション (Phone and
modem options)” in “ コントロールパネル
(Control panel)”.
3
If the “
所在地情報
(Address information)”
display appears, enter “
市外局番
(Area code)”,
then click “OK”.
For Windows
®
XP
For Windows
®
2000 Professional