Docomo FOMA P702iD, Руководство пользователя, Страница: 506 / 522

21
<When you cannot select the COM port number of
“FOMA P702iD”>
Click “ キャンセル (Cancel)” to close the “ 接続の設定 (Set a
connection)” display, then perform the following operations:
(1) From the “
ファイル (File)” menu, select “ プロパティ
(Properties)”.
(2) Select “FOMA P702iD” in the “
接続方法
(Connection method)”
field of the “ 接続の設定 (Set a connection)” tab on the “Sample の
プロパティ (Sample properties)” display.
(3) Uncheck “
国/地域番号と市外局番を使う
(Use country/region
code and area code)”.
(4) Click “OK”.
Then, go to step 7.
6
The properties of the COM port number
appear on the display, then click “OK”.
p This display appears when you select a COM port number in
step 5.
7
Specify an access point name (APN).
Enter an access point name (APN) in the following format:
AT+CGDCONT = cid, "PPP", "APN"
cid: Enter 2 or any number from 4 through 10.
※ If you have already specified cid, be careful that its contents are
overwritten by the access point name you enter here.
"PPP": Enter "PPP" as it is.
"APN": Enclose an access point name (APN) in double quotation
marks (").
(Example: When specifying APN “XXX.abc” in cid2)
AT+CGDCONT=2,"PPP","XXX.abc"
Enter this character string, then press . If “OK” appears, the APN
setting is completed.
p To confirm the current APN setting, enter “AT+CGDCONT? ”.
The set APNs are listed on the display.
8
Confirm that “OK” appears on the display.
9
“ ファイル (File)” menu Select “ ハイパーター
ミナルの終了 (Exit Hyper Terminal)” to exit
Hyper Terminal.
p If the message “ 現在、接続されています。切断してもよろしいで
すか ? (Currently connected. Do you want to disconnect this line?”)
appears, select “
はい
(Yes)”.
p The message “ セッション XXX を保存しますか ? (Do you want to
save session XXX?)” then appears. You do not need to especially
save that session.
Information
p The access point name (APN) is information to be registered in the
FOMA phone, so if you connect another FOMA phone, you need to
register the access point name (APN) again.
p To continue using the access point name (APN) of the personal
computer, register the same access point name (APN) for the same cid
number in the FOMA phone.
p
If the entered AT command is not displayed, enter “ATE1 ”.
■ cid (Registration number)
The FOMA phone has registration numbers, cid1 through cid10. cid1
contains “mopera.ne.jp” and cid3 contains “mopera.net” as an access point
name (APN) by default. To connect to a provider other than mopera U or
mopera, you need to set the access point name (APN) to one of cid2 or
cid4 through cid10 as specified by the provider or network administrator.
Default cid contents
■ “Phone number” for connecting to an access point name (APN)
you register in cid
“ _ 99 ___ <cid No.>#”
(Example) When connecting to the access point name (APN) you
register in cid2, enter the following:
_ 99 ___ 2#
■
Resetting/Confirming the access point name (APN) settings
You can use AT commands to reset/confirm the access point name
(APN) settings.
Resetting access point name (APN)
The access point name (APN) for cid=1 returns to “mopera.ne.jp”
(default), and for cid=3 returns to “mopera.net” (default); the settings for
cid=2 and cid=4 through cid10 are reset to being unregistered if you reset
them.
(Entry method)
AT+CGDCONT=
(When resetting all the cid contents)
AT+CGDCONT=<cid> (When resetting only a specific cid)
Confirming access point name (APN)
The currently specified access point name appears on the display.
(Entry method)
AT+CGDCONT?
Registration No. (cid) Access point name (APN)
1 mopera.ne.jp (mopera)
2 Not set
3 mopera.net (mopera U)
4 to 10 Not set