Docomo FOMA P702iD, Руководство пользователя, Страница: 462 / 522

460
App
e
nd
ix/Extern
a
l Device Li
nkage/
Troub
leshooting
Scanni
ng Function
Select “Software update” from the setting menu and enter your Terminal Security Code; then you can
confirm the reserved time.
. You can change or cancel the reserved date and time from the display for checking reservation. To change,
select “Change”. To cancel, select “Cancel”.
If you select “NO” or “Cancel” from each display, the display for ending the operation appears.
Select “YES”; then the software update ends and the Stand-by display returns. To return to the previous display, select “NO”.
Regarding data and programs downloaded or obtained from sites or i-mode mail messages to the FOMA
phone, you can detect data that might cause failure, can delete it, and can stop launching an application
program.
p Use the pattern data for checking. Update the pattern data, because it is updated each time new trouble is found. (See page 461)
p
The scan function is for filtering out the data that causes failure to mobile phones at the time of browsing web pages or
receiving mail messages. Note that this function works only when the pattern data for each failure has been downloaded to your
mobile phone and when the pattern data for each failure is found.
p The data contained in the pattern data varies depending on the mobile phone model. Therefore, note that we may stop
distributing the pattern data to mobile phones that have been on the market for three years or more.
If you set the scan function to “ON”, data or program is automatically checked when you try to run it.
1
Lock/Security Scanning function Set scan
2
ON or OFF YES
p When the scan function is set, an alert is shown by five levels if data that might cause failure is detected. (See page 462)
Checking reservation
Ending software update
Information
p
If the battery level points “ ” during operation, the software download or rewriting is not done and the operation ends.
Scanning Function
Protecting FOMA Phone from Data Causing Failure
First of all, update the pattern data to make it the latest.
Set Scanning Function <Set Scan>
Setting at purchase ON
< >