Docomo FOMA P702iD, Руководство пользователя, Страница: 294 / 522

292
Mail
Sett
ing De
tails
for
SMS
(Short Me
ssages
)
You can set whether to request an SMS report for when
sending an SMS message.
The SMS report lets you know that your SMS message
was delivered to the destination.
1
Stand-by display ( ) Mail settings
SMS report request ON or OFF
p While displaying the SMS Composition display, press
( ) and select “SMS report req.”.
You can set the period that the SMS Center holds an
SMS message sent but unsuccessfully delivered due to
the out-of-service area, etc.
1
Stand-by display ( ) Mail settings
SMS validity period
Select a holding period
p If you select “None”, the stored SMS message is re-sent after a
certain period of time and deleted from the SMS Center.
p While displaying the SMS Composition display, press
( ) and select “SMS valid. per.”.
Setting Details for SMS (Short Messages)
SMS Report Request
Setting at purchase OFF
Information
p
You can check received SMS reports in the “Inbox” folder.
p You cannot set this function if the UIM is not inserted.
SMS Validity Period
Setting at purchase 3 days
Information
p This setting is stored in the UIM.
p You cannot set this function if the UIM is not inserted.
You can set the characters you can enter into the text of
SMS messages. You can set to enter only half-pitch
alphanumeric characters and half-pitch symbols.
1
Stand-by display ( ) Mail settings
SMS input character
Japanese (70char.) . . . . . You can enter full-pitch and half-pitch
characters. You cannot enter
pictographs except “
” and “ ”
(see page 421). You can enter up to
70 characters for the text.
English (160char.) . . . . . . You can enter only half-pitch
alphanumeric characters and
half-pitch symbols. You can enter up
to 160 characters for the text.
p While displaying the SMS Composition display, you can press
( ) and select “SMS input char.”. In this case,
“Japanese (70char.)” is displayed as “Japanese” and “English
(160char.)” is displayed as “English”.
You can set the address and “Type of number” for the
SMS Center.
This setting is for getting any service other than SMS
Service you currently use.
1
Connection setting
SMS center selection User setting
Enter an address
p
You can enter up to 20
half-pitch characters.
2
International or Unknown
p If “
:
” or “#” is included in the entered address, you cannot set it for
“International”.
SMS Input Character
Setting at purchase Japanese (70char.)
Information
p You cannot set this function with text entered.
SMS Center Selection
※
Normally, you do not need to change this setting.
■ To reset the user setting to “DoCoMo”
1. The display in step 1 Reset Enter your Terminal Security Code
YES
Information
p This setting is stored in the UIM.
p
You cannot set this function if the UIM is not inserted.