Docomo F-04F, Руководство пользователя, Страница: 157 / 195

Appendix/Index
155
●
The docomo mini UIM card is not recognized.
Is the docomo mini UIM card installed in the right
direction?
→ P27
● The screen reacts slowly when a touch panel is tapped/
key is pressed.
When large amount of data is saved in the terminal or
transferring large-size data between the terminal and
microSD card, the reactions on the screen may be
delayed.
● The terminal, etc. become hot while operating/charging.
While operating or charging, or if you call, etc. for a long
time while charging the battery, the terminal, battery pack
and adapter may become hot. There is no problem and
you can continue to use them.
●
The terminal becomes hot while operating/charging.
If high temperature of the terminal continues, charging or
some functions may be disabled.
● The terminal becomes hot and the power turns OFF.
If you activate several applications, use camera, connect
to the Internet for a long time while charging the battery,
etc., temperature of the terminal may be raised. When the
terminal is in high temperature state for a long time,
charging or functions may stop or screen brightness may
be adjusted. And the power of the terminal may shut
down to prevent you from burns.
● The display is dim.
• Have you changed any of the following settings?
- Brightness
→
P112
- Privacy view
→
P112
- NX! eco → P116
●
Display flickers.
If [Automatic brightness] of the screen brightness is
marked, display backlight automatically changes
according to the ambient brightness. The screen may
seem to be flickering then.
→ P112
● The display has afterimages.
• If the battery pack is removed from the terminal before
the terminal power is turned OFF, afterimages may
remain. Attach/remove the battery pack after turning
OFF the power.
• If the same screen is displayed for a while, afterimages
of that screen may remain even after the screen is
changed for a certain operation.
● The clock is not on time.
The clock time may be wrong when the terminal stays
powered on for a long time. Make sure that [Automatic
date & time] and [Automatic time zone] of Date & time are
marked, and then turn OFF and ON the terminal in a place
with good signal conditions.
→ P131