Docomo F-04F, Руководство пользователя, Страница: 106 / 195

Settings
104
❖
Initializing an access point
By initializing an access point, the default state is restored.
1
From the Home screen, → [Settings] → In
WIRELESS & NETWORKS, [More...] → [Mobile
networks]
→
[Access Point Names]
2
→ [Reset to default]
✔
INFORMATION
･
You can delete access point one by one by selecting an
access point from the APN list screen,
→
Tap [Delete APN].
❖
sp-mode
sp-mode is an ISP for NTT DOCOMO smartphone. In addition
to accessing Internet, you can use the mail service using the
same address as i-mode mail (@docomo.ne.jp), etc.
･
sp-mode is a service requiring subscription. For details on
sp-mode, refer to NTT DOCOMO website.
◆ Wi-Fi
You can use mail or access the Internet by connecting to the
home or company network or public wireless LAN access
point.
To connect to a wireless LAN access point, you need to set
connection information.
■ Reception interference caused by Bluetooth
Wireless LAN (IEEE802.11b/g/n) and Bluetooth function use
the same frequency band (2.4GHz). If you use the wireless LAN
function and Bluetooth function of the terminal at the same
time, reception interference may occur and the
communication speed may lower. Also, you may hear noise or
have a connection problem.
Even when you use only wireless LAN function of the terminal,
the same problem may occur when someone uses a Bluetooth
device near you. In this case, do the following.
･
Keep the terminal over 10 m away from a Bluetooth device.
･
If you use the terminal within 10 m, turn off the Bluetooth
device.