International roaming
148
■
Date & time
When [Automatic date & time]/[Automatic time zone] in [Date
& time] is marked, the date, time and time differences of the
terminal are corrected by receiving information related to time
and time differences from the network of overseas
telecommunications carrier you connect to.
･
Correction of the time or time differences may not be
performed correctly depending on the network of overseas
network operator. In that case, set time zone manually.
･
Timing of correction varies by the overseas network
operator.
･
"Date & time"
→
P131
❖
About inquiries
･
For loss or theft of the terminal or docomo mini UIM card,
immediately contact DOCOMO from the spot to take the
necessary steps for suspending the use. For inquiries, see
the last page of this manual. Note that you are still liable for
the call and communication charge incurred after the loss or
theft occurred.
･
For using from land-line phone, entering "International call
access code" or "Universal number international prefix" for
the country is needed.
By default, the terminal is set to automatically search and
switch to an available network. To switch network manually,
perform the following operations.
･
If you release SIM lock and use SIM by a carrier other than
NTT DOCOMO to perform data communication, set an
access point (APN) before use.
→
P103
◆
Setting Network Mode
1
From the Home screen,
→
[Settings]
→
In
WIRELESS & NETWORKS, [More...]
→
[Mobile
networks]
2
[Network Mode]
3
[LTE/3G/GSM (Auto)]/[LTE/3G]/[GSM]
✔
INFORMATION
･
If the mode is set to [LTE/3G/GSM (Auto)] and a GSM/GPRS
network and 3G network of the same network operator are
detected at the same time, connection to a 3G network is
given priority.
･
If the mode was set to [GSM] in the country you visited, set
the mode to [LTE/3G] or [LTE/3G/GSM (Auto)] after returning
to Japan.
Settings for overseas use
Содержание F-04F
Страница 1: ...F 04F INSTRUCTION MANUAL 13 12...
