69
Handset Settings
SH-01Q_E_07.fm
[69/71]
Precautions about various security codes
Do not use easily estimated numbers for security codes to be set
such as “birthday”, “part of a phone number”, “address or room
number”, “1111” or “1234”. Keep a separate memo of security
codes.
Keep security codes private. If the security codes are found and
improperly used by others, DOCOMO shall not be liable for any
loss of the users.
If you forget your security codes, you are required to bring your
identification (a driver’s license etc.), your handset and your
docomo mini UIM card to a docomo Shop.
For details, contact the number listed in “General Inquiries” on
the last page.
PUK (PIN Unlock Key) is described in the agreement form
(customer copy) you received at the time of subscription at a
docomo Shop. If you made a subscription at a shop other than a
docomo Shop, bring your identification (a driver’s license etc.)
and your docomo mini UIM card to a docomo Shop or contact the
number listed in “General Inquiries” on the last page.
■
Security key (security code for various functions)
If you set any restrictions, you need to enter the security key to
temporarily disable them. [Passcode] ([0000]) is set as a security
key by default but you can change it (
n
P. 69 “Changing security
key”).
If you enter the wrong security key five times continuously, you
cannot enter it for 30 seconds.
■
Network security code
Network security code is a four-digit code required for confirming
the subscriber’s identity when an order is received at a docomo
Shop, docomo Information Center or “
お客様サポート
” (Support),
used for accessing various network services, etc. You can set any
code at the time of subscription but you can change the code.
As for those with “docomo ID/password” of the general support
website “My docomo” designed for PC (in Japanese only), the
registration procedure for a new network security code is available
from PC. Alternatively, in the home screen, [dmenu]
/
[
お客様サ
ポート
] (Support)
/
[
各種お申込・お手続き
] (Various Applications/
Procedures) to change your network security code.
Refer to the page second from the last of this manual for details
on “My docomo” or “
お客様サポート
” (Support).
■
PIN code
A docomo mini UIM card has a security code called PIN code. This
security code is set to [0000] by default but you can change the
code (
n
P. 69 “Setting up SIM card lock”).
The PIN code is a four- to eight-digit security code that is entered
when a docomo mini UIM card is inserted or when a device is
turned on to prevent unauthorized use of the docomo mini UIM card
by a third party. Making/Receiving a call and the device operation
are enabled by entering PIN code.
Use the previously set PIN code when inserting a docomo mini
UIM card that has been used in another device. It is [0000] if the
setting has not been changed.
If you enter the wrong PIN code three times continuously, it is
locked and the docomo mini UIM card becomes unavailable. In
this case, unlock with “PUK” (PIN Unlock Key).
■
PUK (PIN Unlock Key)
PUK (PIN Unlock Key) is an eight-digit number used to disable the
PIN code lock. You cannot change the code.
If you enter the wrong code ten times continuously, the docomo
mini UIM card is completely locked. In this case, contact a
docomo Shop.
1
In the home screen, [
R
]
/
[Settings]
/
[Lock &
Security]
/
[Application lock]
2
Enter the passcode
/
[OK]
/
[Change security
key]
3
Select an item
Finger list
: Set a pattern which forms by linking four or more
dots.
Passcode
: Set four- to sixteen-digit number.
Password
: Set four to sixteen alphanumerics or half-width
symbols including at least one alphabet.
You can make settings for the PIN code.
1
In the home screen, [
R
]
/
[Settings]
/
[Lock &
Security]
/
[Set up SIM card lock]
2
Select an item
Lock SIM card
: Set whether to enter the PIN code when the
power is turned on.
Change SIM PIN
: Change the PIN code.
1
In the PIN locking screen, enter PUK (PIN
Unlock Key)
2
Enter the new PIN code
3
Enter the new PIN code again
Encrypt data on the handset.
If you encrypt data on the handset, the password entry screen for
decrypting the storage is displayed every time the power is
turned on. Enter the lock number or password set in Screen lock.
Carry out Reset all to disable the encryption (
n
P. 70 “Reset
all”).
Carry out the operations while charging the battery with its
battery level still left sufficiently.
Set Screen lock to Lock No. or Password in advance
(
n
P. 67 “Lock & security”).
1
In the home screen, [
R
]
/
[Settings]
/
[Lock &
Security]
/
[Encrypt phone]
2
[Encrypt phone]
/
enter the lock number/
password
/
[Next]
3
[Encrypt phone]
Changing security key
Setting up SIM card lock
In Japan, you cannot make a call to the emergency number
(110, 119 or 118) when a docomo mini UIM card is not inserted,
while the PIN code is locked or from the PUK (PIN Unlock Key)
entry screen.
The setting is saved on the docomo mini UIM card.
Disabling PIN lock
Encrypting phone
In the password entry screen for decrypting the storage, you
cannot make a call to the emergency number (110, 119 or 118).
Note that all data on the handset are deleted if the encryption is
interrupted.
SH-01Q_E.book 69 ページ ２０１３年１２月１８日 水曜日 午後３時２３分
